Watch Anthony’s Towable Boom Lift Demo
This video is intended to be a brief operational video that supplements your rental equipment training and personal responsibility. Your safety and project success are important to us: Be sure to refer to the manufacturer's Operator Manual and Safety Book for a complete understanding of how to use this equipment properly: http://manuals.gogenielift.com/Operat...
1. Position boom lift at your work site and set the parking brake
2. Unhitch:
a. Unchain boom lift from tow vehicle
b. Pull the hitch collar pin out and slide collar back to release hitch from ball
c. Drop leg jack and crank to raise boom off hitch
d. Drive tow vehicle away
3. Level boom lift:
a. On ground control box, pull out emergency stop (red)
b. Insert key and turn right to operate outriggers
c. Press yellow (down) and black/function buttons together to drop all 4 outriggers; green lights will come on when foot pads reach the ground
d. Hold buttons down until steady tone indicates machine is level
4. Put on safety harness and fasten chest and leg straps securely
(Safety harnesses are available for purchase at our Sales Division: https://billsequipment.com/bills-sale...)
5. Raise basket:
a. Turn key left to shift operations to basket controls; outrigger lights will stay on
b. Release boom lock
c. Enter basket and slide harness hook into safety bar
d. On basket controls, pull out emergency stop (red)
e. Press blue (up) button or yellow (down) button at the same time as the appropriate black/function button to position yourself as needed
6. When finished, prepare the boom for transport:
a. Return the boom to its retracted position
b. Drop the ‘v’ into its cradle
c. Press emergency stop
d. Remove harness from safety bar and step out of basket
e. Lock boom back into place
7. Return outriggers to upright position:
a. Turn key right to utilize ground controls
b. Press blue (up) and black/function buttons together to raise outrigger arms back up
c. Hold buttons down until outriggers are stowed in upright position
d. Turn key to center (off) position and remove key
8. Hitch the tow boom to your tow vehicle
a. Raise tow boom with jack, then drop onto hitch ball and secure
b. Release parking brake
c. Crank up leg jack, remove pin, lift jack and lock it into raised position
d. Chain boom lift to tow vehicle
For extended use: Plug in the tow boom to recharge the its power supply.
To utilize power tools while in the tow boom: Plug accessory power cord into external power source and plug power tools into the junction box located inside the basket.
Questions? Call us at 719-471-9715 or visit our website: https://billsequipment.com/
Visit Bill’s Equipment & Supply Video Library at https://billsequipment.com/resources/... and Blog at https://billsequipment.com/resources/... for more instructional videos and samples of rental equipment use.
Transcript:
Hi, my name is Anthony, I work with Bill's Equipment Supply and I'm going to show you the operations of our Genie 34/20 electric tow boom. This is a refer to the operator's manual and safety book inside the compartment and we will also when you rent this machine go over operation instructions with you. So, the first thing you want to do is after you get this to your house, or your residence, before you unhook from your truck, is set your parking brake.
From there, you can start unchaining the boom from your truck. Chains off, bring these up off the ground so they're not in the way. Then you pull your collar pin out. Slide the collar back and it releases the hitch from the tongue of the ball. From there you want to put your leg jack down. Lock it back into place. And start cranking down and raise the boom off the hitch of your truck.
Now you're gonna pull your emergency stop out make sure it's out. Turn your key to the right to your ground control functions. Your blue and yellow are the operations of the up and down of the machine. The solid black one here is for the self-levelers of your four outriggers. That's the only thing it will be used for. You will press the black one and the yellow one at the same time and all four of the outrigger arms will come down simultaneously.
And once these outrigger arms touch the ground, the indicator lights will light up saying that the outriggers have contact with the ground. You keep pressing, holding this button in this machine will jockey itself to level itself out. The steady tone you hear means the machine is leveled. Now I'm going to show you guys how to put on a harness...",
"thumbnailUrl": [
"https://i.ytimg.com/vi/rw98FrCbjxM/hqdefault.jpg?sqp=-oaymwEZCNACELwBSFXyq4qpAwsIARUAAIhCGAFwAQ==&rs=AOn4CLBsrhdkbWGaL-bd3KJ5L24a2FQcQw"
],
"uploadDate": "2019-12-13T08:00:00+08:00",
"duration": "PT9M53S",
"contentUrl": "https://www.youtube.com/watch?v=rw98FrCbjxM",
"embedUrl": "https://www.youtube.com/watch?v=rw98FrCbjxM&feature=emb_title",
"interactionStatistic": {
"@type": "InteractionCounter",
"interactionType": { "@type": "http://schema.org/WatchAction" },
"userInteractionCount": 5775
}
}
