This versatile certified electric 20″ push floor saw is perfect for indoor sawing. Optimized weight and balance to ensure ergonomic working position and zero CO₂ emissions during use. The built in water tank allows for cutting without the need for an external water supply. Suitable for small sized service and repair jobs for a majority of floor sawing applications.

(Damage waiver, taxes, fuel & delivery charges not included)

Hour – N/A
Half Day – NA
Day – $150
Week – $535
28 Day Month – $1420

All requests are for equipment availability and are not a guarantee of availability or reservation. We are not able to guarantee a response to equipment requests in less than 24 hours.

This 16.5″ Masonry Saw allows you to cut brick, pavers, stone and veneer with unmatched precision and speed. The 16.5” blade allows for a 5.5” cut depth and a full 24” length of cut. The high-flotation tires on the built in stand allow one person to easily move and transport the saw wherever it is needed on the job. With an integrated dust collection system, 99.5% of the dust produced is automatically collected.  Blade is included with rental.

(Damage waiver, taxes, fuel & delivery charges not included)

Hour – NA
Half Day – $90
Day – $125
Week – $490
28 Day Month – $1320

Power: 120v, 1.75 HP motor

Blade diameter: 16.5″

Maximum cutting depth: 5.5″

Weight: 150 lbs

Length: 43″

Width: 32″

Height: 40″

All requests are for equipment availability and are not a guarantee of availability or reservation. We are not able to guarantee a response to equipment requests in less than 24 hours.

The EDCO Turbo/Edge 7″ floor grinder is ideal for removing coatings, build-ups, markings, overlays, or paints, as well as edge grinding along vertical surfaces. It’s small, lightweight construction allows the operator to grind close to obstacles.

These concrete floor grinders are equipped with a single 7” diameter Diamond Segmented Disc that is an aggressive surface material grinder for removing excess concrete, epoxy mortar, urethane coatings and overlays, and non-skid abrasive coatings on steel, concrete, or polymer slab floors.

A three-position articulating frame adjustment allows for left angle, right angle or straight position grinding. The multiple-position handle assembly on this concrete surface grinder allows the operator to work behind the unit for edge grinding or in front of the unit and control the amount of grinding pressure applied. Contact us to get this floor grinder rental.

(Damage waiver, taxes, fuel & delivery charges not included)

Hour – NA
Half Day – $115
Day – $145
Week – $510
28 Day Month – $1020

All requests are for equipment availability and are not a guarantee of availability or reservation. We are not able to guarantee a response to equipment requests in less than 24 hours.

(Damage waiver, taxes, fuel & delivery charges not included)

Hour – NA
Half Day – $40
Day – $50
Week – $250
28 Day Month – NA

14″ diameter

Wet cutting blade

1″ diameter arbor

Segment height: .512″

Width: .125″

All requests are for equipment availability and are not a guarantee of availability or reservation. We are not able to guarantee a response to equipment requests in less than 24 hours.

These floor saws are developed with a clear focus on ergonomics and user friendliness.

Their unique transmission makes them ideal for more demanding jobs, despite their compact size. They have a variable speed transmission, raise/lower assist system, and self-contained differential drive system eliminating drive gear from rear wheels making it simple to handle.

They feature left and right side cutting capability. The control console contains engine start/stop switch and throttle, transmission control lever, and tachometer.

(Damage waiver, taxes, fuel & delivery charges not included)

Hour – N/A
Half Day – NA
Day – $150
Week – $535
28 Day Month – $1420

All requests are for equipment availability and are not a guarantee of availability or reservation. We are not able to guarantee a response to equipment requests in less than 24 hours.

This Edco dual-disc Magna-Trap electric floor grinder is ideal for smoothing, grinding, and cleaning horizontal concrete surfaces.

Grinding out trowel marks, rough finish, rain spots and high volume projects are Dyma-Serts’ forte. The Strip-Serts are designed to remove paint, epoxy and urethane coatings without grinding into the concrete.

This dual-disc grinder has an exclusive leveling system that allows true level grinding. The working width is 22″ and will grind approximately 400-500 sq. ft at 1/32″ with Dyma-Serts. The counter-rotating discs prevent the machine from pulling from side to side and gives the operator greater control and a better, more uniform finish.

Dyma-Certs and Strip-Certs are a separate, required rental (unless you have your own) to use this machine.

(Damage waiver, taxes, fuel & delivery charges not included)

Hour – NA
Half Day – $125
Day – $160
Week – $560
28 Day Month – $1045

All requests are for equipment availability and are not a guarantee of availability or reservation. We are not able to guarantee a response to equipment requests in less than 24 hours.

This electric portable single-disc floor grinder is available with standard abrasive stones or Diamond insert stones to remove more material quickly.

Its round shroud allows you to grind close to walls. Carbide inserts are also available for removing old epoxies and foreign resins. This EDCO concrete floor grinder has water hook-up for better dust control.

Ideal for areas less than 1,500 square feet.

Residential applications:

1. Grinding concrete
2. Repairing damaged concrete slabs
3. Removing urethanes or epoxy thin-coats
4. Leveling high spots or surface imperfections
5. Smoothing rough surfaces, rain marks or trowel marks
6. Removing mastics, thin-sets, paint build-ups, resins and more

Dyma-Certs and Strip-Certs are a separate, required rental (unless you have your own) to use this machine.

(Damage waiver, taxes, fuel & delivery charges not included)

Hour – NA
Half Day – $115
Day – $145
Week – $510
28 Day Month – $1020

All requests are for equipment availability and are not a guarantee of availability or reservation. We are not able to guarantee a response to equipment requests in less than 24 hours.

This Bosch electric demolition saw uses a 14″ diameter blade and has a maximum 4.5″ cutting depth. Abrasive or diamond blades for concrete, asphalt, iron, or steel are available.

(Damage waiver, taxes, fuel & delivery charges not included)

Hour – NA
Half Day – $60
Day – $110
Week – $330
28 Day Month – $686

4300 RPM

15 Amps

4.5″ cutting depth

Uses a 14″ abrasive or diamond blade (separate rental)

All requests are for equipment availability and are not a guarantee of availability or reservation. We are not able to guarantee a response to equipment requests in less than 24 hours.

(Damage waiver, taxes, fuel & delivery charges not included)

***Blades are included in rental rates***
Hour – NA
Half Day – $200
Day – $235
Week – $940
28 Day Month – $2520

Power Source: Corded

Voltage: 100-120 V

Amperage: 20 Amps

Weight: 18.5 lbs

Blade diameter: 9″

Max cutting depth: 16″

All requests are for equipment availability and are not a guarantee of availability or reservation. We are not able to guarantee a response to equipment requests in less than 24 hours.

Our handheld, gas-powered 14″ demo saws are available in 2 models: Husqvarna K970 and Makita MM4. These saws cut concrete, asphalt, iron, or steel.

Husqvarna Saw

This model K970 demolition saw is reliable, light and powerful.

Husqvarna Features:

• Semi-automatic belt tensioning
• Easy to start with decompression valve
• Maintenance-free recoil starter
• Provides high power with less fuel

Makita Saw

This gas demolition saw does not use mixed fuel like all other currently manufactured saws. It uses straight gasoline. What does this mean? Approximately 80% of demolition saws go to repair shops because someone put straight gasoline in a mixed-gasoline saw. The saws are quieter than all others and they have plenty of horsepower for Colorado Springs and regional elevations.

Makita Features:

• Integrated all aluminum wheels reduce fatigue during long straight cuts and retract when not in use to prevent unexpected movement
• Lower noise at 92.7dB(A) and smoother idle for continuous operation
• Five-stage, foam-paper-nylon filtration system with advance direction air flow provides cleaner air for better engine durability
• Lower fuel consumption at .45 gallons per hour

(Damage waiver, taxes, fuel & delivery charges not included)

Hour – NA
Half Day – $60
Day – $120
Week – $370
28 Day Month – $740

All requests are for equipment availability and are not a guarantee of availability or reservation. We are not able to guarantee a response to equipment requests in less than 24 hours.