The EDCO Turbo/Edge 7″ floor grinder is ideal for removing coatings, build-ups, markings, overlays, or paints, as well as edge grinding along vertical surfaces. It’s small, lightweight construction allows the operator to grind close to obstacles.

These concrete floor grinders are equipped with a single 7” diameter Diamond Segmented Disc that is an aggressive surface material grinder for removing excess concrete, epoxy mortar, urethane coatings and overlays, and non-skid abrasive coatings on steel, concrete, or polymer slab floors.

A three-position articulating frame adjustment allows for left angle, right angle or straight position grinding. The multiple-position handle assembly on this concrete surface grinder allows the operator to work behind the unit for edge grinding or in front of the unit and control the amount of grinding pressure applied. Contact us to get this floor grinder rental.

(Damage waiver, taxes, fuel & delivery charges not included)

Hour – NA
Half Day – $115
Day – $145
Week – $510
28 Day Month – $1020

All requests are for equipment availability and are not a guarantee of availability or reservation. We are not able to guarantee a response to equipment requests in less than 24 hours.

The Multiquip Mix-N-Go Electric Concrete Mixer’s versatility makes it ideal for users of all skill levels. Capable of mixing up to three cubic feet of material, it’s ideal for small footings and bases, binding block and concrete patchwork, or setting fence posts.

This mixer may be used as a wheelbarrow to transport concrete or cement and also comes with a mixer stand which allows the drum to rotate 360 degrees. The polyethylene drum makes for easy clean up: warm water and a simple tap with a rubber mallet does the job on this mixer.

(Damage waiver, taxes, fuel & delivery charges not included)

Hour – N/A
Half Day – $40
Day – $50
Week – $160
28 Day Month – $416

All requests are for equipment availability and are not a guarantee of availability or reservation. We are not able to guarantee a response to equipment requests in less than 24 hours.

This WTB-16 gas-powered concrete buggy has a 16 cu. ft. bucket and features a ride-on platform, hydraulic dump system, aggressive track pattern that easily travels through soft soils and muddy sites, and 2500 lb. maximum payload. It is perfect for transporting ready mixed concrete to areas with minimal space.

This MQ Whiteman power buggy has easy steering dual control levers and its 5 gallon fuel tank allows for long run times.

(Damage waiver, taxes, fuel & delivery charges not included)

Hour – NA
Half Day – NA
Day – $185
Week – $690
28 Day Month – $2050

All requests are for equipment availability and are not a guarantee of availability or reservation. We are not able to guarantee a response to equipment requests in less than 24 hours.

This Concrete Power Trowel is utilized to float and finish new concrete surfaces.

The trowel is optimally balanced, so it can be effortlessly controlled at a wide range of speeds. All models feature air-cooled gasoline engines, 4-blade design, and variable pitch control for adjusting blades to different surface conditions.

(Damage waiver, taxes, fuel & delivery charges not included)

Hour – NA
Half Day – $76
Day – $110
Week – $390
28 Day Month – $1170

All requests are for equipment availability and are not a guarantee of availability or reservation. We are not able to guarantee a response to equipment requests in less than 24 hours.

This Wacker Concrete Power Trowel is utilized to float and finish new concrete surfaces.

The trowel is optimally balanced, so it can be effortlessly controlled at a wide range of speeds. All models feature air-cooled gasoline engines, 4-blade design, and variable pitch control for adjusting blades to different surface conditions.

(Damage waiver, taxes, fuel & delivery charges not included)

Hour – NA
Half Day – $76
Day – $110
Week – $390
28 Day Month – $1170

All requests are for equipment availability and are not a guarantee of availability or reservation. We are not able to guarantee a response to equipment requests in less than 24 hours.

This Edco dual-disc Magna-Trap electric floor grinder is ideal for smoothing, grinding, and cleaning horizontal concrete surfaces.

Grinding out trowel marks, rough finish, rain spots and high volume projects are Dyma-Serts’ forte. The Strip-Serts are designed to remove paint, epoxy and urethane coatings without grinding into the concrete.

This dual-disc grinder has an exclusive leveling system that allows true level grinding. The working width is 22″ and will grind approximately 400-500 sq. ft at 1/32″ with Dyma-Serts. The counter-rotating discs prevent the machine from pulling from side to side and gives the operator greater control and a better, more uniform finish.

Dyma-Certs and Strip-Certs are a separate, required rental (unless you have your own) to use this machine.

(Damage waiver, taxes, fuel & delivery charges not included)

Hour – NA
Half Day – $125
Day – $160
Week – $560
28 Day Month – $1045

All requests are for equipment availability and are not a guarantee of availability or reservation. We are not able to guarantee a response to equipment requests in less than 24 hours.

Concrete scarifiers utilize rotating circular cutting wheels to perform a variety of surface preparation functions, including milling misaligned sidewalks and joints, grooving, texturing, and removing coatings and traffic lines. Cutting depths are adjustable up to 1/8″ per pass.

(Damage waiver, taxes, fuel & delivery charges not included)

Hour – NA
Half Day – $200
Day – $270
Week – $945
28 Day Month – $2835

All requests are for equipment availability and are not a guarantee of availability or reservation. We are not able to guarantee a response to equipment requests in less than 24 hours.

(Damage waiver, taxes, fuel & delivery charges not included)

Hour – NA
Half Day – $18
Day – $28
Week – $112
28 Day Month – $336

70 lbs.

Cuts/bends up to 3/4″ rebar

All requests are for equipment availability and are not a guarantee of availability or reservation. We are not able to guarantee a response to equipment requests in less than 24 hours.

(Damage waiver, taxes, fuel & delivery charges not included)

Hour – NA
Half Day – NA
Day – $20
Week – $60
28 Day Month – $120

Approx. dimensions: 25.5″w x 58.7″l

Bucket volume: 6 cu. ft.

All requests are for equipment availability and are not a guarantee of availability or reservation. We are not able to guarantee a response to equipment requests in less than 24 hours.

This Wacker Neusen Concrete Vibrator is used to consolidate concrete and eliminate air pockets.

(Damage waiver, taxes, fuel & delivery charges not included)

Hour -NA
Half Day – $40
Day – $64
Week – $240
28 Day Month – $600

120 V electric

15 Amp

1-2 HP

Head diameter: 1-1.75″

Stinger length: 6.5-10′

16,000 RPM

Approx. weight: 20 lbs.

All requests are for equipment availability and are not a guarantee of availability or reservation. We are not able to guarantee a response to equipment requests in less than 24 hours.